Popis

Begadi hop gumička PRO 70° ( FLY5 SHORT ) 5mm

Špičkové hop up gumičky, které na servisu používáme a skvěle se nám osvědčily.

Dosahujeme s nimi lepších výsledků, než s gumičkami od Maple leaf, které jsou v ČR velmi oblíbené.

Jelikož dělá BEGADI více typů gumiček s různými typy přítlaků a lemem gumičky, jsou skvělé do všech komor a na všechny pohony ( aeg, hpa, gbb )

Vyzkoušej i ty BEGADI gumičky, nebudeš litovat !

Inox

The FLY series are newly developed HopUp Buckings / Rubbers from Begadi, designed in Germany!
These are specially designed for modern AEG/S-AEG weapons and HopUp units and have some special features to increase the range and reduce the dispersion

Short:
This is a bucking with a short sealing lip, this is necessary for some HopUp Units like Cyma/Begadi Sport NOVA, MOD 25, BR10 with Rotary Unit, E&L M4.

Otherwise feeding problems may occur with a 21.50mm Nozzle. If you are not sure which version is suitable for you, we always recommend to install a regular version first.
Patch:
Our patch of the FLY5 and FLY7 bucking has a radius of 2.5mm (5mm diameter). This is smaller than the BB itself and thus ensures accurate centering of the BB in the barrel.
Likewise, the BB is guided straight during firing to prevent runaways to the side. To generate a constant hop effect, the braking effect decreases in the front area.

Alignment:
To prevent the bucking from twisting on the barrel, there are two supports in the inner area. These rest on the barrel and support the alignment and installation.
Thus, the installed tensioner can press the patch inside straight on the BB, which also prevents runaways to the side.Note that a BB can only fly straight if the gun is also held straight

Seal & Comparison:
Here is the difference in the available HopUp rubbers. Especially with HPA systems, it often happens that the installed Nozzle can not be changed and is therefore not compatible with every rubber.

This is where our SHP and MHP series comes into play.

Our existing FLY and MAG rubbers have a slightly larger seal, making them compatible with flat nozzles. (e.g. Begadi PRO Nozzle with double O-ring).
However, some manufacturers use a pointed Nozzle in their guns, if this is the case, the Nozzle had to be changed or adjusted in length. In the SHP and MHP series,

the seal was made smaller, so now pointed nozzles no longer need to be changed.

Notice: For a flat or round Nozzle we still recommend the FLY or MAG series, for pointed Nozzles the SHP or MHP series should be used.

Durability and Wear:
All of our Begadi PRO Buckings are made from a very tough and durable rubber compound.

This keeps the set HopUp effect constant over a long time and wears out much slower than conventional rubbers.
You also don’t have to worry about the rubber cracking on the patch during disassembly or maintenance.

However, you should exercise some caution when pulling it off. Please note the correct choice of hardness for your weapon (energy and bullet weight). If a too soft rubber is selected here, the wear increases!

Marking/Hardness:
To be able to distinguish our buckings, the respective version is directly marked. The rubber compound (hardness) is reflected in the color: 50° green – 60° blue – 70° black.
Thus, it is immediately apparent which version it is.

Versions 5mm or 7mm:
Another special feature are the two available lengths of the inner patch. The respective number indicates the required length of the running window.

– 5mm version: These Buckings are compatible to all standard barrels with a HopUp window of 4,8 – 5,2mm and can be used with all grammages.

For very heavy BBs (0,36g+) we recommend to use the 7mm version + tuning barrel, because less pressure of the tensioner is needed

– 7mm version: This is a special version which is only suitable for tuning barrels with a 6.5 – 7mm window (DaVinci 70, TNT…).

Due to the significantly longer patch, a much stronger Magnus effect is created here and it is especially suitable for heavy BBs very well.

Please note that it can come with light BBs rather to an overhop! We recommend the 7mm combination only from 0.36g + BBs to use.